Quantcast
Channel: Recent Topics - Surfski.info - Surfski.info
Viewing all 1625 articles
Browse latest View live

Epic surf ski ergonomics - by: Aurelius

$
0
0
The Epic V7 isn't the fastest ski I've ever owned, but I can't help but be impressed by how comfortable a ski it is even after four hours of paddling. No ski I've ever tried has even come close in that regard.

What I'm curious about is whether the seat shape is the same for all Epic skis. In a couple of years, I may want to upgrade to a V10/V12/V14, but only if it's going to be as good a fit for me as the V7 is. Unfortunately the only local Epic dealer refuses to stock them, so I'm unable to try them out.

Wake vs. hull speed - by: Sandy

$
0
0
OK armchair boat designers...latched on to an Alerion 38 as I was paddling back into the Newport Beach Harbour. (Alerion 38 is a nice performance oriented sailboat ). Real nice bump and the skipper was amused to see me drafting. Looked up and could see his boat speed indicator , so...the harbour water surface was relatively smooth and the sailboat was reaching close hauled maintaing a nice straight course right up the middle of the channel , at boat speed of 7.5 kts I could sit on the wake with minimal paddle strokes to maintain sweet spot , when sailboat speed increased to 8 kts. I had to paddle hard and found little respite in terms of sweet spot to draft . We played this game all the way in so not just a flash in the pants , My question ( and I am sure the answer is a combination of factors) , was the increased effort in the speed increase more a factor of sailboat wake "waveform" or surf ski speed beyond optimal efficiency for hull design ( a huki S1-XL ) . I was surprised how much difference there was and assumed, which was not the case , that as sailboat speed increased the bump would deepen and be easier to sit on .

Bucket width - by: dannyboy

$
0
0
Looking for input from experienced paddlers who have moved uto more "elite' level skis as skill has improved.

As you progress to a less stable ski the length increases and beam decreases. Since beam decreases can one assume the bucket width also decreases?

I have wide hips and fit well in a S18S but a V8 is way too tight in the bucket. Is Stellar known for having wider buckets?

Say as i improve I want to get into a Stellar SEI since the beam is less will bucket be too tight? i know best thing is to sit in the ski but I suppose my question is as follows:

Is/are there ski manufacturers who over their product line provide a wider bucket?

If not where does that leave bigger guys who have improved and wish to get into an elite level ski? Are we stuck at beginner/intermediate level skis? When I sat in the V8 it had been suggested to add a pad to a narrower bucket to get my hips in the wider area but this would change the whole stability of the ski would it not?

V8 to V12 - by: kwolfe

$
0
0
So as many of you know, I have a 1st gen V8 and been paddling 4-5 times per week for the past year and change. I also paddle SUP and OC1. I feel rock solid on the ski. I paddle 99% flat water lakes and rivers. The only chop I see is either from boat wakes or on the one lake I paddle at, we can get up to 2-3ft rolling swells if the wind is right. I have zero issues with balance in any one these conditions and haven't fallen out of the ski since after the first two weeks of owning it.

Lately I've been getting the itch to trade up to something a bit faster, more challenging and with a narrower catch. I found a fellow who has a V12 Ultra who might want to trade skis (plus a little money). I was originally looking for maybe a V10 but this is a good opportunity. Is the boat really unstable? Is this unheard of? it's just that I feel rock solid on the V8. Like I would have to try and fall out of the darn thing.

Thanks for entertaining a goofy question.

Kev

NELO 520 ski feedback - by: photofr

$
0
0
It’s been more than a month, and I should have tried to spend more time on the 520 – sooner. Yesterday was different: I took my 560M out in the morning, and rushed to take the 520 out for a late afternoon Downwind run with a buddy.

Since I represent Nelo surfskis in France, I’ll let someone else provide you with a complete review. In the meantime, here’s what I keep hearing from customers testing out the 520 ski:
Turns super-fast
Stable, very stable.
Feels like you are paddling a much narrower ski.
Fast (I think that one surprised everyone, including myself).
Light.
So easy to surf (DW).

So I kept listening, and I kept paddling next to them without “really” spending much time on the 520 myself. I actually spent a few hours on flat water (testing out max speed, stability, etc…) but never really put it on a chaotic Downwind – until yesterday. Here’s how I see it:

It accelerates really fast = catching more bumps with more ease.
It’s super maneuverable = linking more bumps with (too such) ease.
Very reassuring in rough water = waiting for friends is actually relaxing.
I could have had a beer while flying DW; it’s that comfortable in cross-chop DW runs.

Probably worth noting:
I placed a 5’1” (42 kg) paddler on the 520 in the morning. Needless to say, she isn’t very big, but she found the bucket very comfortable. In the afternoon, I placed a novice kayaker on the same 520; but a very different individual. He was 6’1” and about 75 kilos. The foot-plate can accommodate the extremes.

So far, I find the 520 to be a great contender for…
The novice surfski paddler: on flat water, on calm water, and on windy days.
The intermediate paddler: to gain more confidence and skills in rough conditions.
The advanced paddler: on those insane DW days, or to add safety in group situations.

I now can’t help wondering: we are at the end of July, and how many intermediate and advanced paddlers have actually tried the Nelo 520?

Cowboy remount - by: WingSuit

$
0
0
I recently took a class from a world class paddler. He said that everyone should be able to remount both sides (of course) and both ways (sidesaddle as well as cowboy). Armed with that info, I went out today to try and learn the cowboy remount. Try is all I dId. googled it, and couldn't find anything on it, no videos no nothing. Assuming it's called the cowboy method, and there's not another name that I am missing. Asked a couple of experienced paddlers, they don't use the cowboy method. So, two questions: anyone have a link to a how to, video or otherwise? And, if I can effectively remount sidesaddle, do I really need to be able to do it? When would I use it, over the sidesaddle method?

Stellar SEI speed versus V10 gen 2? - by: Bodsy

$
0
0
G'day Brains Trust, looking into moving to a hopefully faster but still pretty stable ski to race in both flatwater and a few ocean races and fun offshore paddles. I'm currently in a 2012 Epic V10 sport Club layup (model before current) which has been good for me. Have had quite a few paddles and a couple of 20 k flatwater races in V10 Gen 2 performance which was ok but I felt twitchy and wouldn't take it out to sea just yet.

I've had a look at Wesley's charts for SEI and others and read other posts but keen for anyone's opinions or experience with the SEI and whether its in the same ballpark speedwise as a current model V10 (Wesley rates it slightly quicker...) . I'd prob go with Advantage layup 14.5 kg for a bit of extra stability and durability in the ocean and hopefully not lose much speed compared to the excel at 11.5kg.

Been paddling for around 18 mths now and still working on paddling technique and fitness but really enjoying it all even though I'm Canberra based and winter's a challenge (new v10 bailer in the closed position was nice!). For point of reference my current flatwater speed for 10km is around 10.5 kph in the V10 sport and i'm 50, 95kgs and hopefully poundage is going down! Thanks and happy paddling all

Epic Surfski Transportation System - by: foundwood

$
0
0
First and foremost: I am an Epic Expert in North Carolina. This is a method of hauling surfskis that I designed and implemented and it is intended for use with Epic kayaks. I hope that someone else is able to modify this system to meet their particular needs. If I can help you in any way, then please feel free to contact me. I am not interested in manufacturing or distribution.


Decrease volume or retrofit bailer ?? - by: dannyboy

$
0
0
looking to either have ski drain quicker or take on less water initially.

Has anybody tried closed cell foam in the cockpit to decrease volume ? I don't see as it would have any effect on ski as it is so light. This would effectively decrease volume in ski hence ski takes on less water and therefore drains quicker, Correct?? Only issue I see is a potential problem with remount as the foam may get in the way. In my mind I envision a nice form fitting cockpit with just enough room for leg and torso movement. Am i nuts? Good idea??

Alternatively can an Anderson bailer be retrofit by a reputable craftsman? Any special questions to ask before handing over the ski? Does it matter the type of layup?

Just looking for a way to keep cockpit drier. Just picked up a gen 1 S18s on the cheap with single drain and it drains slooowly.

NELO 560M Review - by: photofr

$
0
0
The new NELO SURFSKIS have made their way to Brittany, France. With this comes the brand new NELO testing facility: it’s very small, but easily accessible for about 1/3 of the entire French population. The small testing facility is conveniently located on the water’s edge of a protected sea, with easy access to the ocean less than 1km on a surfski.

Currently in stock for testing: the NELO 520 and the NELO 560M.
The NELO 560L is on its way!

The 520 is super cool, and very versatile (I’ll spend more time on it during the next couple of weeks and try to provide some real life feedback) but this review is about the NELO 560M.

NUMBERS
560 represents its length: 560cm, 5.6 meters, or 18’4 feet.
M Represents a ski designed for Medium to Small paddlers (roughly 77 kilos or less).
(For reference: I still haven’t measured the width, but it’s supposed to be 45cm.)

LOOKS & FEEL
First thing out of the box, you’ll notice a very glossy and shiny ski. Its near-perfect finish will still remind you that this was hand-made, with real humans behind it. Overall, the ski is super clean, so don’t expect too many blemishes because it’s super sharp looking.

The curves are beautiful: essentially, a needle nose ski with a “fat” behind for added stability exactly where you’d need it (behind you).

RIGGING
There’s no denying it: you will be very impressed. I know I was blown away by what I saw. First, there’s the carbon foot plate and pedals (they are very different from anything out there). Adjusting the foot plate length is super easy and very secure once in place. Speaking of adjustments: I have “the world’s shortest legs” and I like to have my knees a little higher than most people. Naturally, the first thing I did was to check if this was going to “work” for me. So, shorter paddlers: finally a ski that will fit you, with plenty of room for the long-legged-counterpart.

Next, you’ll stumble on the foot strap: this one is padded, but rigid. The additional power you’ll get from it may just blow you away. Its adjustment is a little finicky but actually quite simple, with multiple pre-sets.

Took me 15 minutes to unpack the entire ski, rig it, and paddle away. Takes about 20 seconds to change the foot plate length. Too cool.

BUCKET
There’s something missing in the bucket: the hump is nearly all-gone. How does this affect drainage? I don’t know, but I can tell you this: I have swamped my ski trying to draft a boat and it emptied itself in record time. We may very well see copies of the disappearing hump quite soon, because it may not be needed as much as we “thought”.

SEATING AREA
It’s higher than what you are used to if you have used a ski in the last 7 or 8 years, but that’s a good thing. After all, think about it: when we want to seat down at the beach, we try to find a rock, a stump, a step… something to ultimately place our butts higher than our heels. It sounds simple, but try this: seat down on the floor (butt and heels at the same level) and stay there for 2 hours. Now try the same thing, but instead of seating on the floor, try seating on a small step, or even a small phone book. Feels better, doesn’t it?

Well, essentially, the seating area will feel way more natural, right off the bat. More comfort equals more power, so I am all for it and wouldn’t have it any other way.

The bucket is an ergo bucket that isn’t as deep as many other skis. This is one of the first skis where I won’t need any padding for hips, but because it’s ergo, my wife will also be able to paddle it.

Is the bucket the most comfortable bucket ever? I don’t know, and I seriously doubt it. Everyone is made differently, so you’ll have to see for yourselves. For me, it feels natural, and very comfortable (I have narrow hip bones). For my wife, she loves it (and needless to say: she wished she had narrower hip bones). 

DRAINAGE
The NELO drainage is highly efficient: see above as it drains faster than ever. The best part: its ease of operation, where finally you are able to concentrate on your paddling, while using your feet to naturally open and close the latch. It’s very intuitive, and very well placed.

THE CATCH AREA
Being a “needle nose” ski, you’ll find the paddle entry point to be very narrow. It’s pure physics: this will make for a more efficient paddle stroke. There’s one little drawback that I noticed after the first 20k: the outside of the pedals stick out a little… and I have hit it with my paddle a few times, but that’s an easy fix.

For me, there’s nothing worse than a wide catch area – coming from someone with a narrow frame. This feels super nice, comparable to the Spark, but with more comfort and less “boat”.

STABILITY
The seating area of the 560M feels higher than the V10L, and much higher than the Spark. Stability, however, feels way better than the Spark and better than the V10L. I feel a lot of additional stability due to how snug the boat feels (you are part of the ski for a change), and the wider area behind the seat is just added bonus for an Elite ski. Primary stability is okay, but secondary stability is excellent. See, I did it: I spoke about stability without revealing any trade secrets regarding the hull .

SMALLER DETAILS
There are couple of things that also impressed me:
There are three leash plugs: one under the seat designed to be used as a leash attachment point, and two more in front of the footwell. The two points up front can be used to secure gear, or as a towing point if need be. It’s no big deal, but I really like that.

The plastic rudder cover is too simple: no tools required to open it, so a big bonus there. I recommend taping your Allen key in there, with surf wax or similar.

The stiff foot strap makes for a great handle and secures the boat on your shoulder when the wind is high.

SIDEWIND
This is the lowest profile ski I have been on in a long time. The closest thing may have been the Chalup Ski back in 1988. Having said that, smaller paddler (heck, ALL paddlers) will find that paddling this ski in side wind may be easier than with any other skis, mostly because the bow doesn’t get blown away like a butterfly in the wind.

WET OR DRY RIDE?
It’s a wet ride, where you are part of the ocean. The drainage is lighting fast, but you will get wet. Sidewalls are not too tall (as I feel they should be) because truth be told: you are going to get wet any way. Remounting is therefore easier, but it's still a wet ride. The deflector is a huge bonus, and works wonders. Mine came with it, and I believe that’s standard on all NELO Surfskis.

UPWIND
I have been paddling in the same spot for about 2 years and I just blew my personal “best” out of the water on an upwind section I have done 100’s of times. Average speed was high (for me) and I was still getting used to the ski. Upwind speed is good, but the feeling was great; I seriously had fun going up wind up swell.

DOWNWIND
As mentioned above, it’s a bit of a wet ride, but one that I thoroughly enjoyed. Conditions were chaotic, with confused seas, but I was able to use my body (much) more than ever before. It’s another dimension, literally.

Most of this comes from the shorter ski, shorter than it’s been for the past decade, but about the same as back when I had tons of fun in the ocean. Essentially, the ski is super maneuverable, catches runs very easily, and is more responsive than anything I have been on. I am seemingly able to paddle less, where I am finally able to use my body weight to keep that nose in the “hole”. Apparently, the laziness in me is coming out, and that’s cool as heck.

ACCELERATION
Faster – way faster… hands down.

WEIGHT AND STIFFNESS
The skis is about the same weight as the V10 GT, but not as stiff. Don’t get me wrong, it’s solid, and quite stiff with zero soft spots to notice, but not quite the brutal stiffness of prepreg. To be fair, it’s also more “absorbing”, especially when it comes to the imperfections encountered at sea. It’s a more comfortable ride that doesn’t seem to slow performance, but that’s just how I feel having paddled both.

The weight of my skis (carbon sandwich construction) is 9.8 kilos, all rigged, including rudder and rear bungie. Yes, I can carry it under my arm all day.

MADE IN EUROPE
Having a ski made in Europe feels good (since I now live in Europe and all) but there are other advantages. Shipping takes about 7 days to reach European countries, and a custom ski can be ordered with approximately 6-week of a waiting period (not 4 months like numerous other companies outsourcing to China).

I don’t know, call me stupid, but this is 2016: I would proudly (and will) place a flag from Portugal on my ski, but I kind of find it difficult to put a Chinese flag on one of my Stand Up Paddle boards made in China. Call me sentimental, but I will also have an Hawaiian flag on my ski 

Plus, it’s not just made in Europe, or just made in Portugal; it’s made from one of the biggest composite provider in the World, and trusted by more Olympians than any other brands out there. So yeah: I am proud that it’s made near home.

PRICES
Prices are always a factor, granted, but this should put a smile on people’s faces. A light surfski is now affordable!

Two types of constructions are available.
TYPE 4 CONSTRUCTION
Carbon/Kevlar/Epoxy
Approx. 11 kilos
Approx. 2450 euros

TYPE 7 CONSTRUCTION
Carbon/Epoxy
Approx. 9.5 kilos
Approx. 3850 euros

For reference, I just bought a Stand Up Paddle board, Carbon/Epoxy construction, 14 feet in length, without a rudder, for 3800 euros, and it still weighs 11.5 kilos, and it wasn’t made in Europe.

PERKS OF A SHORTER SKI
What can you too expect from a shorter ski?

For starter, it’s easier to handle on land, where you are most likely to damage your boat. Inevitably, your ski may last longer from less accidental damage on land.

It’s shorter, so there’s less flex on the water, and on the roof of your car; that’s just pure physics.

More reactive to body shifts, and more maneuverable downwind should yield more fun, better average speed, and less paddling fatigue. Keeping the bow into the “hole” will be faster from a more responsive ski, and will allow you to “lock in that wave” longer than ever. Look it up: skis in the 18-19 foot range have always been very fast, see Molokai Channel crossing history.

If you can fit your car in a garage, you should no longer have any problem storing your ski right at home.

FASTER ACCELERATIONS
Shorter waves heaven: the 560M does really well in open ocean swells, but for the majority of people on surfskis, downwind in smaller conditions or in a bay will have you smiling again, and downwind paddling in the Mediterranean Sea will have you “flying”.

CHOICE OF COLORS
You can have a white ski… if that’s what you still want, but you can also choose from a huge variety of colors available online.

CUSTOM SKIS
Custom skis come with your custom colors. Turnaround times take about 6 weeks.

SHIPPING
There are 2 ways to get your new skis to you.
1. You can place your order with one of the reps in France, and pick it up from them (no extra charge).
2. You can place your order with one of the reps, and have it delivered to your house (for about 100 euros more).


IN A NUTSHELL
The new 560M is a shorter surfski that’s surprisingly more responsive than other skis people are used to. It excels for shorter and super light paddlers (though I am told the standard 560 is well-geared towards bigger paddlers like Oscar). When it comes to flat water paddling, the 560M doesn’t disappoint.

When you first paddle the ski, you are likely to notice:
Its needle-nose look, and tight paddle catch area.
Wide area located seemingly behind you.
Higher seating position; comfortable.
Very secure foot strap system.
Good stability for an Elite ski.
Amazing downwind control.
You will be “one” with the water, literally.
My favorite: the ability to once again affect your ski in the surf, even if you weight “nothing”.










QUESTIONS, TESTING OR ORDERING IN FRANCE
Contact: Ludovic BACQUET
NELO Testing Center – FRANCE (West Coast)
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
I: www.nelokayaks.com
T: 06.24.74.53.70
International Calls: 011 [33] 624-745-370

Surfski training or rentals in Japan anyone? - by: 10153665249051811@facebook

$
0
0
Hi, I am planning a trip to Japan in October and will go to Tokyo and down to the Okinawa islands. Does anyone know if there are rentals or groups paddling at a particular place so that we can plan our trip :)

Thermoplastic Surfskis, Racing Skis - by: Uffilation

$
0
0
Made the list to seek for a downriver (stone hitting) alternative for the flatter days(+family/guests "abuse ski"), maybe someone has a use for the list for his/her own quest. I guess there are more thermoplastic surfskis and SOT-type-Ski-Hybrids on the market, so you are invited to add the list or correct mistakes. tia

Actual prices s.b. outdated or differ or be lower or ...:

Spirit PRS SKI, Spirit PRS Elite SKI
Manufacturing process: rotomoulding
Made in: Australia
Material: PE
Length: 567cm
Width: 50cm
Moulded weight: 20.5kg
Moulded weight, Elite: 18.3kg
Weights fully outfitted: ?
Colours: white+many others as per google
Price: from AU$1595, 1190€

Spirit Racing SKI
Manufacturing process: rotomoulding
Made in: Australia
Material: PE
Length 496m
Width: 51cm
Moulded weight: 19.5kg
Weight fully outfitted: ?
Colours: white
Price: from AU $1295

Spirit Fury Racing Ski
Manufacturing process: rotomoulding
Made in: Australia
Material: PE
Moulded Weight: 19kg
Moulded Weight: Elite 17.6kg
Length: 570m
Width: 47cm
Price: from AU$ 1895.00

FINN Molokai
Manufacturing process: rotomoulding
Made in: Australia
Material: PE
Length 590m
Width: 47,5cm
Moulded Weight: 18kg
Price: AU$ $2150 (website)

FINN Endorfinn
Manufacturing process: rotomoulding
Made in: Australia
Material: PE
Length: 520cm
Width: 54cm
Standard Weight 18kg plus deckout 5-6kg
Lightweight 15kg plus deckout 5-6kg
Standard AU$1399 (website)
Lightweight AU$1649 (website)

Cobra Surf Ski
Manufacturing process: rotomoulding
Made in: New Zealand
Material: PE
Length: 520cm
Weight: 21 kg?
Price: ?

VAJDA Raptor Ski
Manufacturing process: thermoforming
Made in: Slovakia
Material: double layered ABS-type with outer acrylic layer
Length: 535cm
Width: 53cm
Weight fully outfitted: 19.5kg
Colours: pearl white, metallic: orange, red, blue
Price: 1250-1350+- €

Epic V7
Manufacturing process: rotomoulding
Made in: South Africa ? (test paddled one with Made in USA sticker though, anyone has details?)
Material: PE, solid skin with foam layer
Length 520m
Width: 54cm
Moulded weight: <19kg
Weight fully outfitted: 22.7kg (from EPIC website)
Colours: white
Price: $1495, Au$ 1995, 1295€

THINK Nitro/Pyranha Octane
Manufacturing process: rotomoulding
To be made in: England?
Material: PE
Length 535cm
Width: 53cm
Color: orange stripes, white?

NELO 510, PE ... ????
pops up in the 2016 pricelist for surfskis , so?

Inflatable SURFSKI - by: photofr

$
0
0
With the recent trend to invite more paddlers into the surfski world, I have to admit that it would be nice to see some inflatable surfskis on the market. It would also seem that the first manufacturer to come up with a decent inflatable model (say in the 50cm in width, complete with an external rudder system) will have a definite edge.

I am not saying people on this board would jump and purchase one to race on them… but they could be made quiet rigid and fun - even for downwind applications. After all, today's inflatables are actually quite advanced and fused (very light, and capable of high PSI).

In fact, I know I would purchase one… for friends wanting to goof around, or simply for crazy stormy days like today… where I would catch a shuttle to an island and paddle back DW.

What are your thoughts?

(SOLD) Epic V10 GT - 9.2 kilos !!! - by: photofr

$
0
0
SOLD SOLD SOLD

FOR SALE: 3100 EUROS (updated price)
(retail: 4700 euros + shipping + the months of waiting)

Epic V10 GT (100% Pre-Preg Carbon construction)
The only one in France, and one of a kind graphics.
For sale in France.
2015 model (black and white color scheme).

SPECS:
6.45m x 45cm
9.2 kilos
Nomex Honeycomb Core, Prepreg Carbon Fiber, High Temperature Cure.
Amazingly stiff - you will most likely be blown away.

CONDITION:
Used, but well cared for.
Surf Fin (Titanium shaft, carbon rudder) in excellent condition
Hull: impeccable.
Deck rear: Impeccable.
Deck front: minor superficial blemishes on bow, and one sticker blemishes on clear coat.
Zero leaks, SOUND BOAT

IDEAL PADDLER:
Taller than me: 5 feet 7 inches (167cm) or taller...
Heavier than me: I am 129 pounds (about 57 kilos) - I recommend it for paddler over 65 kilos.

NOTE:
Unless you are going to be paddling in totally flat water, you'll want to be an advanced paddler with a fair amount of experience on an elite Surfski.

This boat excels in:
Accelerations (catch bumps with ease, because it weighs nothing)
Sprints - run away on your sprints like never before
Downwind - this ski will handle some of the craziest downwind I have seen in a long time
All Around - this ski is far more stable than the original V10.
Primary Stability is well above the norm.



For info: I have tried everything, and I am still too short, but I have paddled this ski in "remarkable" ocean conditions this winter, with a smile on my face from the start to the finish - making for some really super fun downwind runs.

Epic V12 for sale - WA state - by: gallagherwilson

$
0
0
Move to invest in real estate forces me to sell my toy. Had this boat a little over a year, and love it, but its time to move on for now. My loss is your gain. This is a fantastic boat for a paddler looking to improve skill and speed. It's twitchy on primary, but has amazing secondary stability. Bought from another local paddler who took exceptional care of it.

Current generation V12 in Ultra layup, its incredibly lightweight at 27 lbs.

I'm including suction LED light, Vaikobi paddle PFD, new style bailer (upgraded by Sterling Kayaks in Bellingham), cockpit splash shield and two Don Kieseling rudders (6" weed less and surf rudder).

Asking $2700 or best offer. Can meet for test paddle in N. Seattle/Edmonds or SLU area if desired.

Epic V8 for sale - by: kwolfe

$
0
0
Well last year I looked to trade for a V10 sport but I think this time I'll just try a straight sale. I have a first gen V8. Boat is is perfectly good shape. Comes with a kickup rudder as well as the 4" weedless.

Not a thing wrong with the boat. I would simply like to move into something a little faster and more challenging like a V10S or V10 (although I'm not tied to Epic). Looking to get $1600. For those of you around me (live in south central PA), I have friends who live in DC and Phili who I visit pretty often so I could bring it out on a trip. I'm also not far from Baltimore.

Totally open to trades in case anyone wants a more stable ski. Thanks!

Fenn mako XT vs Fenn Tarpon for surfing - by: mickeyA

$
0
0
I hear "XT" stands for "crossover Tarpon" and that the hulls are the same except for more rocker (and or course the flared bow) on the Tarpon. What are other differences in these two older model 19'x19" Fenns? The Tarpon is deep seat version, adjustable foot pedals. The XT is same weight (fiberglass) with 9" elliptical surf rudder. 1) Is the seat placement and/or rudder further up on Tarpon making it easier to catch steeper shore waves (the building swells 100-200 meters off shore surfing towards shore)? 2) Is one more stable than the other? 3) does Tarpon surf noticeably better: less pearling, less broaching, better steering? I have the XT and can trade for same condition Tarpon, but only if Tarpon is a noticeably better surfer. It is used exclusively for riding these types of waves (no competitions, no flatwater, just surfing off beach, in and out over and over). Thanks, mickeyA

Mocke Downwind camp - by: jazzman

$
0
0
Well , I've finally got the nerve to enrol in one of the Mockes downwind camps ( a belated 50th birthday present to myself). So if anyone sees a New Zealander wandering around Fish Hoek in October with VERY wide eyes , looking like he needs a beer; it will be me , and , yes , I'll be needing a beer!! I have no idea what I'm in for but I'm assured I'll have a great time. Bigger water than I've ever paddled but if spending time with Dawid and Jasper can't improve my confidence , then nothing will. Part of me is bloody nervous , the other part really can't wait!

Change in Management at OCEAN Surfski (OSS) - by: OSS

$
0
0
Today, we unfortunately need to announce that Mario Vesely, Co-founder of OCEAN Surf Sports, asked for his removal from the OCEAN management and the removal as our main dealer for the Sydney region. OCEAN accepted his request and wishes Mario all the best and success for the future with his own surf ski and kayak business “Supermario”.
Mario, as a Co-founder and shareholder, expressed his intend to remain on board of directors.
Should you wish to get information about OCEAN or test paddle an OCEAN ski in the Sydney region, please contact Paddlecraft (www.paddlecraft.com.au) or OCEAN directly.

Think you're a good surfer? Lessons from the pro's - by: Newbflat

Viewing all 1625 articles
Browse latest View live